home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Space & Astronomy
/
Space and Astronomy (October 1993).iso
/
mac
/
TEXT_ZIP
/
daily
/
930107.ZIP
/
930107.DFC
Wrap
Text File
|
1993-01-18
|
52KB
|
1,215 lines
"930107.DFC" (50605 bytes) was created on 01-07-93
07-Jan-93 Daily File Collection
These files were added or updated between 06-Jan-93 at 21:00:00 {Central}
and 07-Jan-93 at 21:00:25.
=--=--=START=--=--= NASA Spacelink File Name:930107.REL
1/7/93: BIG BANG THEORY PASSES TOUGHEST TEST
Paula Cleggett-Haleim
Headquarters, Washington, D.C. January 7, 1993
Randee Exler
Goddard Space Flight Center, Greenbelt, Md.
RELEASE: 93-5
The Big Bang Theory passed its toughest test yet with the latest
results reported from NASA's Cosmic Background Explorer (COBE) team at the
American Astronomical Society meeting in Phoenix, Ariz., today.
Precise measurements made by COBE's FIRAS of the afterglow from the Big
Bang -- the primeval explosion that began the universe approximately 15 billion
years ago -- show that 99.97 percent of the early radiant energy of the
universe was released within the first year after the Big Bang itself.
"Radiant energy" is energy emitted in any form of light, from x-rays
and gamma rays to visible and infrared light or even radio waves. COBE's Far
Infrared Absolute Spectrophotometer (FIRAS) was designed to receive the
microwave and infrared energy from the Big Bang.
"The Big Bang theory comes out a winner," said COBE Project Scientist
and FIRAS Principal Investigator Dr. John C. Mather of NASA's Goddard Space
Flight Center, Greenbelt, Md. "This is the ultimate in tracing one's cosmic
roots," Mather said.
All theories that attempt to explain the origin of large scale
structure seen in the universe today now must conform to the constraints
imposed by these latest measurements.
This includes theories that postulate large amounts of energy released
by such things as black holes, exploding supermassive stars or the decay of
unstable elementary particles. In other words, there were not a lot of "little
bangs," as suggested by some theories.
The Big Bang Theory predicts that the spectrum of relic radiation
should be that of a perfect "black body" unless there were major energy
releases more than a year after the explosion. (A black body is a hypothetical
cosmic body that absorbs all radiation falling on it, but reflects none
what-so-ever. A black body emits at the same temperature at every wavelength.)
These latest FIRAS results reveal that later energy releases did not occur.
The COBE scientists now can say that the temperature of the afterglow
radiation is 2.726 degrees above absolute zero (273 degrees below zero on the
Celsius scale) with an uncertainty of only 0.01 degrees.
Today's announcement is the result of analyzing data from the FIRAS
during its 10 months of observations. Hundreds of millions of measurements
were combined to obtain these unprecedentedly pre "Making certain that all of
the measurements were combined correctly required exquisitely careful work and
lengthy analysis by a large team of COBE scientists," Mather reported.
"We are seeing the cold glow still remaining from the initially very
hot Big Bang. These results now limit the size of any 'after shocks' following
the Big Bang. The closer we examine the Big Bang the simpler the picture gets,"
said Mather.
"It took us 18 years of careful effort to reach this point, but now we
can say that the Big Bang Theory has been tested against observations to a fine
degree of precision," explained Mather.
"Experimental evidence of the Big Bang was first found by Edwin Hubble
in the 1920's. He found that distant galaxies in ever direction are going away
from us with speeds proportional to their distance. Therefore, gallaxies that
are farther away are going faster. This is exactly the pattern that would
occur if the entire universe originated in a single explosion, now called the
Big Bang.
Papers on these results and their implications soon will be submitted
to the Astrophysical Journal for publication.
COBE, launched Nov. 18, 1989, is managed by NASA's Goddard Space Flight
Center, for NASA's Office of Space Science and Applications, Astrophysics
Division, Washington, D.C.
Source:NASA Spacelink Modem:205-895-0028 Internet:192.149.89.61
=--=--=-END-=--=--=
=--=--=START=--=--= NASA Spacelink File Name:930107.SHU
KSC SHUTTLE STATUS REPORT 1/7/93
SPACE SHUTTLE WEEKLY STATUS SUMMARY
Thursday, January 7, 1993
George H. Diller
Kennedy Space Center
Vehicle: OV-105/Orbiter Endeavour Mission Number: STS-54
Location: Launch Pad 39-B
Primary Payload: TDRS-F/IUS-13 + Diffuse X-Ray Spectrometer (DXS)
Launch Date: January 13 8:52 a.m. EST
Inclination: 28.45 degrees Crew Size: 5 astronauts
Mission Duration: 5 days 23 hours 33 minutes
Nominal Landing: KSC Jan. 19 8:24 a.m. EST
STS-54 IN WORK:
- ordnance connections
- hypergolic tank pressurization
STS-54 WORK COMPLETED:
- Range Safety command checks
- TDRS battery charging
- IUS/TDRS power-on stray voltage checks
- DXS interim servicing
- external tank purges
- reactant system purges
- install crew escape pole
STS-54 WORK SCHEDULED:
- external tank closeouts on Friday
- solid rocket booster closeouts on Friday
- IUS battery voltage checks on Friday
- final payload closeouts on Saturday
- begin launch countdown at 1 p.m. Sunday, January 10
- astronaut arrival at 3:30 p.m. Sunday
- close payload bay doors at 8:45 p.m. Sunday
Vehicle: OV-102/Orbiter Columbia
Current location: OPF Bay 2
Mission: STS-55/Spacelab-D2 Inclination: 28.45 degrees
Launch timeframe: February, wk 4 Nominal Landing Site: KSC
Mission Duration: 8 days 22 hours Crew size: 7
STS-55 IN WORK:
- troubleshooting payload bay door latching
- installation of main engine heat shields
- functional testing of waste containment system
- testing of OMS/RCS redundant electrical system
STS-55 WORK SCHEDULED:
- payload bay door cycle and latch tests on Sunday
- install Spacelab D-2 laboratory module on Monday
- mating external tank to solid rocket boosters on Jan. 13
STS-55 WORK COMPLETED:
- fuel cell checkout
- freon coolant loop checkout
- main engine installation
- Spacelab tunnel installation
ISSUES AND CONCERNS:
Engineers are troubleshooting difficulty latching the payload bay
doors. As a result Spacelab D-2 installation has been
rescheduled from today until Monday. The initial troubleshooting
will focus on the strongbacks attached to the doors. It is not
clear at this time whether there might be direct schedule impact.
In the VAB, the left forward booster segment which was destacked
immediately before the Christmas holidays has been restacked and
leak checks have been successful.
Vehicle: OV-103/Discovery Mission Number: STS-56
Location: OPF Bay 3
Payloads: ATLAS-2/ODERACS/SSBUV/SPARTAN/SUVE
Launch timeframe: March, wk 3 Crew Size: 5
Mission Duration: 8 days Inclination: 57 degrees
Nominal Landing Site: KSC
STS-56 IN WORK:
- inspections of 17-inch quick disconnect
- liquid oxygen main propulsion system leak checks
- reinstall wheel and tire assembly
- orbiter hydraulic servicing
- Ku band antenna testing
- radar altimter testing
- potable water servicing
- tile removal and replacement/tile repairs
STS-56 WORK COMPLETED:
- remove and inspect drag chute hardware
- flush and drain waste management system
- removal of forward reaction control system
STS-56 WORK SCHEDULED:
- hypergolic deservicing this weekend
- reconfigure payload bay for ATLAS-2
- humidity separator flow performance testing
ISSUES AND CONCERNS:
Source:NASA Spacelink Modem:205-895-0028 Internet:192.149.89.61
=--=--=-END-=--=--=
=--=--=START=--=--= NASA Spacelink File Name:930107.SKD
DAILY NEWS/TV SKED 1/7/93
Daily News
Thursday, January 7, 1993
Two Independence Square, Washington, D.C.
Audio service: 202/358-3014
% STS-54 processing activities continue on schedule for
Endeavour's Jan. 13 launch;
% Hubble team announces discoveries at Phoenix meeting,
COBE results presented;
% NASA selects 36 more Small Business Innovation
Research contracts for $19.
* * * * * * * * * * * * * * * *
Final closeout activity for the STS-54 payloads is
underway at the Kennedy Space Center as the launch
processing team there prepares Endeavour for its
scheduled launch next Wednesday, Jan. 13, at 8:52 am EST.
Technicians there yesterday completed main engine
closeouts and began work on installation of the orbiter's
onboard computer mission software memory. Tomorrow, the
processing team will begin external tank closeout
activity. The launch countdown begins at 9:00 am EST on
Sunday, Jan. 9. The flight crew is scheduled to arrive
from Houston later Sunday afternoon.
The mission is scheduled as a 5-day, 23-hour flight with
nominal landing at Kennedy's Shuttle Landing Facility on
Tuesday, Jan. 19, at 8:24 am EST.
* * * * * * * * * * * * * * * *
Astronomers, using data from the Hubble Space Telescope,
announced at the American Astronomical Society's Phoenix
meeting today the discovery that an astrophysical object
long held to be unusual is in fact two merged galaxies.
The object, Markarian 315, has fascinated astronomers for
a decade because of a huge jet of gas spewing out from
its core out to a distance of 240,000 light years.
Markarian 315 is half-a-billion light years from Earth
and is believed to harbor a huge black hole, which the
Hubble astronomers now believe has been refueled by
galaxy merger. The jet, the team reported, is probably a
remnant of the time the galaxies actually merged.
In another presentation made at the Phoenix meeting,
scientists using data from the Cosmic Background Explorer
reported that continued analysis of the data obtained on
the background radiation present in every quadrant of the
sky has imposed severe new restrictions on theories which
purport to explain the radiation. The new measurements
precisely gauge the background radiation at 2.726 degrees
above Absolute Zero (degrees Kelvin).
Based on theoretical constraints, this new measurement
limits the amount of energy which could have been emitted
after an initial Big Bang and essentially places the Big
Bang theory in the solid forefront of cosmological
evolution theories. Other theories have suggested a
succession of lesser bangs at differing periods following
an initial bang as a means of establishing the finely-
detailed structure of the present day universe. The Big
Bang does not provide a means, by itself, of explaining
the complex structure seen throughout the universe in the
form of galaxy clusters, super clusters and strings of
clusters.
Here's the broadcast schedule for Public Affairs events
on NASA Select TV. Note that all events and times may
change without notice, and that all times listed are
Eastern. Live indicates a program is transmitted live.
Thursday, January 7, 1993
Live 10:00 am STS-54 crew pre-flight briefing with STS-
54 crew from Johnson Space Center.
at 4:00 and 8:00 pm and 12:00 midnight the broadcast
schedule of the day repeats.
NASA Select TV is carried on GE Satcom F2R, transponder 13, C-Band, 72 degrees
West Longitude, transponder frequency is 3960 MegaHertz, audio subcarrier is
6.8 MHz, polarization is vertical.
Source:NASA Spacelink Modem:205-895-0028 Internet:192.149.89.61
=--=--=-END-=--=--=
=--=--=START=--=--= NASA Spacelink File Name:930107A.REL
1/7/93: HUBBLE DISCOVERS A DOUBLE NUCLEUS IN CORE OF ACTIVE GALAXY
Paula Cleggett-Haleim
Headquarters, Washington, D.C. January 7, 1993
Jim Elliott
Goddard Space Flight Center, Greenbelt, Md.
Ray Villard
Space Telescope Science Institute, Baltimore
RELEASE: 93-006
Astronomers, using the Hubble Space Telescope, now
believe that a galaxy they have observed for a decade
actually is composed of two merged galaxies and that the
collision has provided new fuel for a massive black hole
which is spewing out a jet of gas and other matter 240,000
light-years long.
The galaxy is Markarian 315 located about 500 million
light-years from Earth. The collision and refueling theory
emerged after the Hubble Telescope revealed that the galaxy
has a double nucleus or two core-like regions.
The brighter core-like region is believed to harbor the
massive black hole which accounts for the tremendous amounts
of energy produced by the galaxy. The fainter nucleus is
considered to be the surviving core of a galaxy that recently
merged into Markarian 315.
"The galaxy's active core presumably harbors a black
hole which has been re-fueled by the galactic collision,"
said Dr. Jack MacKenty, Assistant Scientist at the Space
Telescope Science Institute in Baltimore.
"The Hubble images provide support for the theory that
the jet-like feature may be a 'tail' of gas stretched out by
tidal forces between the two galaxies as they interacted,"
explained Dr. MacKenty, Assistant Scientist at the Space
Telescope Science Institute.
"The jet feature is most likely a remnant of a merger
between Markarian 315 and a smaller galaxy," said MacKenty.
This observation best explains the extraordinary 240,000-
light-year long jet-like feature of Markarian 315.
An image of the core of Markarian 315, taken with the
Hubble Space Telescope's Wide Field and Planetary Camera
shows a second, fainter nucleus located approximately 6,000
light-years (or 2 arc seconds in angular separation) from the
galaxy's bright central nucleus. One light-year equals
approximately 5.8 trillion miles (9.3 trillion km).
Galaxy mergers may be one mechanism for driving gas deep
into the heart of a galaxy, astronomers believe. This raw
material fuels massive black holes, theorized to be the
"central engines" in Seyfert galaxies and other active
galaxies.
The Hubble Space Telescope's high spatial resolution
allows astronomers to probe the cores of Seyfert galaxies in
unprecedented detail. In exposures taken with ground-based
telescopes, the companion nucleus is drowned out by the
brighter Seyfert nucleus.
The report on this discovery is by Drs. John MacKenty
and Andrew Wilson of the Space Telescope Science Institute,
Baltimore; Richard Griffiths of The Johns Hopkins University,
Baltimore; and Susan Simkin of Michigan State University,
East Lansing. The report was delivered at the 181st Meeting
of the American Astronomical Society meeting in Phoenix,
Ariz.
The Hubble Space Telescope is a project of international
cooperation between NASA and the European Space Agency.
Source:NASA Spacelink Modem:205-895-0028 Internet:192.149.89.61
=--=--=-END-=--=--=
=--=--=START=--=--= NASA Spacelink File Name:930107B.REL
1/7/93: SPACE STATION FREEDOM PROPULSION FIRING TESTS UNDERWAY
Jim Cast
Headquarters, Washington, D.C. January 7, 1993
Kyle Herring
Johnson Space Center, Houston
Anne McCauley/Evelyn Smith
McDonnell Douglas Aerospace, Huntington Beach, Calif.
RELEASE: 93-7
Static firing tests of a propulsion development test article for Space
Station Freedom began in late December at NASA's White Sands Test Facility
(WSTF) in New Mexico.
The test series will validate the concept and preliminary design of the
propulsion module to be used for space station attitude control, orientation,
speed and altitude control and avoidance of space debris.
"Freedom is no longer a 'paper-station'," commented Richard Kohrs,
Director of the Space Station Freedom Program in Washington, D.C.. "And the
beginning of critical tests with the propulsion module system at White Sands
represents the next and certainly not the last in a long string of reality
checks for Freedom focussing on launch of the first element in the assembly
sequence in about 3 years."
"We have seen Space Station Freedom progress from concept to design and
now to validation of hardware," said Larry Morata, Vice President and General
Manager of McDonnell Douglas Aerospace (MDA) Space Station Division. "We are on
the way to constructing a facility that will promote science and exploration
for years to come."
During Shuttle's second space station assembly flight, two propulsion
modules will be positioned on Freedom. Two more will be added following
man-tended capability and an additional pair will be added prior to permanently
manned capability.
Early propulsion modules will have 13 thrusters located at both ends
and on top of each module. On later modules, the number of thrusters will be
scaled down to nine. The thrusters can be fired independently, allowing
precise positioning of the station.
The article being tested in New Mexico has 10 small thrusters, each
with an operational range of 9 to 25 pounds of thrust and three large thrusters
with 20 to 55 pounds of thrust.
MDA Space Station Division, under contract to the NASA Johnson Space
Center (JSC), Houston, is responsible for the development and testing.
McDonnell Douglas previously carried out structural dynamics and vibration
testing at JSC. The test series will continue at WSTF as needed to complete
validation of the design.
Source:NASA Spacelink Modem:205-895-0028 Internet:192.149.89.61
=--=--=-END-=--=--=
=--=--=START=--=--= NASA Spacelink File Name:930107C.REL
1/7/92: COUNTDOWN FOR STS-54 LAUNCH OF ENDEAVOUR BEGINS SUNDAY, JAN. 10
George H. Diller January 8, 1993
Kennedy Space Center
KSC Release No. 01-93
The countdown clock for the STS-54 flight of the Space
Shuttle Endeavour is scheduled to begin at 1 p.m. (EST) Sunday,
Jan. 10 at the T-43 hour mark. The countdown includes 24 hours
and 32 minutes of built-in hold time leading up to the opening of
the launch window at 8:52 a.m. (EST) on Wednesday, Jan. 13.
At the start of the countdown, the launch team in firing
room 3 of the Launch Control Center verifies the Shuttle vehicle
is powered up and that the data processing system and backup
flight control system are operating. Flight software stored in
the orbiter's twin memory banks will be reviewed, computer con-
trolled display systems will be activated, and the backup flight
system general purpose computer will be loaded.
Preparations also start at the liquid oxygen and liquid
hydrogen storage farms for loading the external tank with super
cold, or cryogenic, propellants. Orbiter navigation aids are
turned on and tested and the inertial measurement units are ac-
tivated.
In parallel with these activities, the launch team prepares
for loading Endeavour's onboard fuel cell storage tanks with liq-
uid oxygen and liquid hydrogen reactants. Also performed at the
start of the countdown is the final stowage, microbial sampling
and water level adjustment of the crew waste management system.
At T-27 hours, the countdown will enter its first built-in
hold. This is a 4-hour hold which extends from 5 to 9 a.m. on
Monday, January 11. When the countdown resumes, the launch pad
will be cleared of all personnel in preparation for loading the
fuel cell storage tanks.
Servicing of the liquid oxygen and liquid hydrogen fuel cell
supply tanks is scheduled to start at the T-25 hour mark. Servic-
ing activities take approximately five hours.
When servicing of the fuel cell tanks has been completed,
the pad will be reopened for normal work, and the countdown will
enter the second planned hold. During this four-hour hold at the
T-19 hour mark, the orbiter mid-body umbilical unit used to load
the super cold fuel cell reactants into the orbiter will be
demated. This hold will extend from 5 to 9 p.m. on Monday.
When the countdown resumes, technicians will complete final
vehicle and facility closeouts and begin activating the orbiter's
communications systems and configuring Endeavour's cockpit for
flight. The main propulsion system and shuttle main engines are
prepared for cryogenic loading.
The orbiter's flight control system navigation aids and com-
munications systems will be activated, and switches in the cock-
pit will be configured for loading of the external tank. The
stowable mission specialist seats will be installed in the flight
and mid-decks.
The countdown will enter the next built-in hold at T-11
hours at 5 a.m. on Tuesday. During the hold, time critical
equipment will be installed in the orbiter's cockpit and the in-
ertial measurement units will be activated and warmed up. At
about 11 a.m., the rotating service structure will be moved away
from the vehicle to the launch position. This hold is scheduled
to last 13 hours, 32 minutes, or until 6:32 p.m. on Tuesday.
At T-9 hours, the onboard fuel cells will be activated, and
the launch team will begin evacuating the blast danger area at
T-8 hours, or about 9:32 p.m. Tuesday. The final items to be
placed in the crew module are now stowed aboard, and the joint
heaters on the solid rocket boosters are also turned on at this
time. At T-7 hours, 30 minutes, conditioned air that is flowing
through the orbiter's payload bay and other areas will be
switched to gaseous nitrogen in preparation for loading the ex-
ternal tank with super-cold liquid propellants. The inertial
measurement units will transition from the warm up stage to the
operate/attitude determination mode at T-6 hours and 45 minutes.
At T-6 hours a steering check of the orbital maneuvering system
engines will be performed.
The countdown will enter another planned built-in hold at
the T-6 hour mark at approximately 11:32 p.m. Tuesday. During
this one-hour hold, final preparations for loading the external
tank will be completed and a pre-tanking weather briefing will be
conducted.
Chilldown of the lines that carry the cryogenic propellants
to the external tank will begin at the T-6 hour and counting
mark, at 12:32 a.m. Wednesday. Filling and topping of the exter-
nal tank should be complete at the beginning of the planned hold
at T-3 hours which will start at 3:32 a.m. Wednesday.
This hold is two hours in duration. During this time, the
ice inspection team will perform a survey of the tank's outer in-
sulation, and the closeout crew will begin configuring the crew
module and white room for the flight crew's arrival. Liquid
oxygen and liquid hydrogen will be in a stable replenish mode
during this time to replace the propellant that "boils" off.
The astronauts are scheduled to be awakened at 3:57 a.m.
Wednesday and have breakfast. Their breakfast is scheduled at
4:27 a.m.
After eating, the crew will receive a briefing on world-wide
weather conditions via satellite from Mission Control in Houston.
The flight crew will suit up in their partial pressure
suits, then leave the Operations and Checkout Building at about
5:37 a.m., at T-3 hours. They will arrive at the pad white room
at about 6:07 a.m. where they will be assisted by white room per-
sonnel in getting into the crew cabin.
Just prior to the T-1 hour mark, the test team and the
flight crew will get another weather update, including observa-
tions from an astronaut flying in a Shuttle Training Aircraft in
the KSC area.
The last two built-in holds will be 10 minutes in duration
and will occur at the T-20 minute mark or at 8:12 a.m. and at the
T-9 minute mark or at 8:33 a.m. During the final hold, the flight
crew and ground team receive the NASA Launch Director's and the
Mission Management Team's final "go" for launch.
Milestones after the T-9 minute mark include start of the
ground launch sequencer; retraction of the orbiter access arm at
T-7 minutes, 30 seconds; start of the orbiter's auxiliary power
units at T-5 minutes; pressurization of the liquid oxygen tank at
T-2 minutes, 55 seconds; pressurization of the liquid hydrogen
tank at T-1 minute, 57 seconds; and the electronic "go" to
Endeavour's onboard computers to start their own terminal
countdown sequence at T-31 seconds. The orbiter's three main en-
gines will start at T-6.6 seconds.
COUNTDOWN MILESTONES
Launch - 3 Days (Sunday, January 10)
Perform the call-to-stations at T-43 hours. Begin check out
of the backup flight system and review flight software stored in
mass memory units and display systems. Astronauts arrive.
Load backup flight system software into the orbiter's fifth
general purpose computer.
Begin stowage of flight crew equipment. Inspect the
orbiter's mid and flight decks and remove crew module platforms.
Start external tank loading preparations.
Launch - 2 Days (Monday, January 11)
Enter first planned built-in hold at T-27 hours for a dura-
tion of 4 hours. Activate orbiter's navigation system.
Resume countdown. Start preparations for servicing fuel cell
storage tanks and begin final vehicle and facility closeouts for
launch.
Clear launch pad of all personnel and load liquid oxygen and
liquid hydrogen reactants into the orbiter's fuel cell storage
tanks.
Enter second planned built-in hold at T-19 hours for four
hours.
After the loading operation, the pad will be reopened for
normal work and orbiter and ground support equipment closeouts
will resume.
Demate orbiter mid-body umbilical unit used during fuel
cell loading. Resume countdown. Activate orbiter communications
systems and prepare Shuttle main engines for propellant tanking
and flight.
Launch - 1 Day (Tuesday, January 12)
Install mission specialist seats in crew cabin. The tail
service masts on the mobile launcher platform will be closed out
for launch.
Enter planned hold at T-11 hours (5 a.m.) for a duration of
13 hours and 32 minutes.
During this hold, the orbiter's inertial measurement units
will be activated and kept in the "warm up" mode and film will be
installed in the numerous cameras on the launch pad. In addition,
safety personnel will conduct a debris walkdown and the pad sound
suppression system water tank will be filled.
The rotating service structure will be moved to the park
position during this hold at 11 a.m. Perform orbiter ascent
switch list in crew cabin.
Resume countdown at 6:32 p.m. Install time critical flight
crew equipment and perform the pre-ingress switch list. Start
fuel cell flow-through purge.
Activate orbiter fuel cells. Configure communications at
Mission Control in Houston for launch. Clear the blast danger
area of all non-essential personnel and switch orbiter purge air
to gaseous nitrogen.
Enter one-hour planned built-in hold at T-6 hours (11:32
p.m.).
Launch Day (Wednesday, January 13)
Resume countdown. Launch team verifies there are no viola-
tions of launch commit criteria prior to cryogenic loading of the
external tank. Start loading the external tank with cryogenic
propellants.
Complete filling the external tank with its flight load of
liquid hydrogen and liquid oxygen propellants. Perform open loop
test with range safety and conduct gimbal profile checks of orbi-
tal maneuvering system engines.
Perform inertial measurement unit preflight calibration and
align Merritt Island Launch Area (MILA) tracking antennas.
Enter two hour hold at T-3 hours. Closeout crew and ice in-
spection team proceeds to launch pad.
Resume countdown at T-3 hours (5:32 a.m.) Complete closeout
preparations in the white room and cockpit switch configurations.
Crew departs astronaut quarters at Operations and Checkout Build-
ing for the pad.
Flight crew enters orbiter. Astronauts perform air-to-ground
voice checks with Mission Control in Houston. Close orbiter crew
hatch. Begin range safety final network open loop command check,
perform hatch seal and cabin leak checks, begin the inertial
measurement unit preflight alignment and range safety closed loop
test. The white room is closed out and the closeout crew moves to
fallback area. Primary ascent guidance data is transferred to the
backup flight system.
Enter planned 10-minute hold at T-20 minutes.
Resume countdown. Transition orbiter onboard computers to
launch configuration and start fuel cell thermal conditioning.
Close orbiter cabin vent valves. Backup flight system transitions
to launch configuration.
Enter planned 10 minute hold at T-9 minutes.
Resume countdown.
Start automatic ground launch sequencer (T-9 minutes).
Retract orbiter crew access arm (T-7:30).
Start mission recorders (T-5:30).
Start APU's. Arm SRB and ET range safety safe/arm devices (T-5).
Start liquid oxygen drainback (T-4:55).
Start orbiter aerosurface profile test (T-3:55).
Orbiter transfers to internal power (T-3:30).
Start MPS gimbal profile test (T-3:30).
Pressurize liquid oxygen (LO2) tank (T-2:55)
Retract gaseous oxygen vent arm (T-2:55).
Fuel cells to internal reactants (T-2:35).
Pressurize liquid hydrogen (LH2) tank (T-1:57).
Deactivate SRB joint heaters (T-1:00).
LPS go for start of orbiter automatic sequence (T-0:31 seconds).
Start SRB gimbal profile test (T-0:6.6).
SRB ignition and liftoff (T-0).
Source:NASA Spacelink Modem:205-895-0028 Internet:192.149.89.61
=--=--=-END-=--=--=
=--=--=START=--=--= NASA Spacelink File Name:6_2_2_42_4.TXT
COUNTDOWN FOR STS-54 LAUNCH OF ENDEAVOUR BEGINS SUNDAY, JAN. 10
George H. Diller January 8, 1993
Kennedy Space Center
KSC Release No. 01-93
The countdown clock for the STS-54 flight of the Space
Shuttle Endeavour is scheduled to begin at 1 p.m. (EST) Sunday,
Jan. 10 at the T-43 hour mark. The countdown includes 24 hours
and 32 minutes of built-in hold time leading up to the opening of
the launch window at 8:52 a.m. (EST) on Wednesday, Jan. 13.
At the start of the countdown, the launch team in firing
room 3 of the Launch Control Center verifies the Shuttle vehicle
is powered up and that the data processing system and backup
flight control system are operating. Flight software stored in
the orbiter's twin memory banks will be reviewed, computer con-
trolled display systems will be activated, and the backup flight
system general purpose computer will be loaded.
Preparations also start at the liquid oxygen and liquid
hydrogen storage farms for loading the external tank with super
cold, or cryogenic, propellants. Orbiter navigation aids are
turned on and tested and the inertial measurement units are ac-
tivated.
In parallel with these activities, the launch team prepares
for loading Endeavour's onboard fuel cell storage tanks with liq-
uid oxygen and liquid hydrogen reactants. Also performed at the
start of the countdown is the final stowage, microbial sampling
and water level adjustment of the crew waste management system.
At T-27 hours, the countdown will enter its first built-in
hold. This is a 4-hour hold which extends from 5 to 9 a.m. on
Monday, January 11. When the countdown resumes, the launch pad
will be cleared of all personnel in preparation for loading the
fuel cell storage tanks.
Servicing of the liquid oxygen and liquid hydrogen fuel cell
supply tanks is scheduled to start at the T-25 hour mark. Servic-
ing activities take approximately five hours.
When servicing of the fuel cell tanks has been completed,
the pad will be reopened for normal work, and the countdown will
enter the second planned hold. During this four-hour hold at the
T-19 hour mark, the orbiter mid-body umbilical unit used to load
the super cold fuel cell reactants into the orbiter will be
demated. This hold will extend from 5 to 9 p.m. on Monday.
When the countdown resumes, technicians will complete final
vehicle and facility closeouts and begin activating the orbiter's
communications systems and configuring Endeavour's cockpit for
flight. The main propulsion system and shuttle main engines are
prepared for cryogenic loading.
The orbiter's flight control system navigation aids and com-
munications systems will be activated, and switches in the cock-
pit will be configured for loading of the external tank. The
stowable mission specialist seats will be installed in the flight
and mid-decks.
The countdown will enter the next built-in hold at T-11
hours at 5 a.m. on Tuesday. During the hold, time critical
equipment will be installed in the orbiter's cockpit and the in-
ertial measurement units will be activated and warmed up. At
about 11 a.m., the rotating service structure will be moved away
from the vehicle to the launch position. This hold is scheduled
to last 13 hours, 32 minutes, or until 6:32 p.m. on Tuesday.
At T-9 hours, the onboard fuel cells will be activated, and
the launch team will begin evacuating the blast danger area at
T-8 hours, or about 9:32 p.m. Tuesday. The final items to be
placed in the crew module are now stowed aboard, and the joint
heaters on the solid rocket boosters are also turned on at this
time. At T-7 hours, 30 minutes, conditioned air that is flowing
through the orbiter's payload bay and other areas will be
switched to gaseous nitrogen in preparation for loading the ex-
ternal tank with super-cold liquid propellants. The inertial
measurement units will transition from the warm up stage to the
operate/attitude determination mode at T-6 hours and 45 minutes.
At T-6 hours a steering check of the orbital maneuvering system
engines will be performed.
The countdown will enter another planned built-in hold at
the T-6 hour mark at approximately 11:32 p.m. Tuesday. During
this one-hour hold, final preparations for loading the external
tank will be completed and a pre-tanking weather briefing will be
conducted.
Chilldown of the lines that carry the cryogenic propellants
to the external tank will begin at the T-6 hour and counting
mark, at 12:32 a.m. Wednesday. Filling and topping of the exter-
nal tank should be complete at the beginning of the planned hold
at T-3 hours which will start at 3:32 a.m. Wednesday.
This hold is two hours in duration. During this time, the
ice inspection team will perform a survey of the tank's outer in-
sulation, and the closeout crew will begin configuring the crew
module and white room for the flight crew's arrival. Liquid
oxygen and liquid hydrogen will be in a stable replenish mode
during this time to replace the propellant that "boils" off.
The astronauts are scheduled to be awakened at 3:57 a.m.
Wednesday and have breakfast. Their breakfast is scheduled at
4:27 a.m.
After eating, the crew will receive a briefing on world-wide
weather conditions via satellite from Mission Control in Houston.
The flight crew will suit up in their partial pressure
suits, then leave the Operations and Checkout Building at about
5:37 a.m., at T-3 hours. They will arrive at the pad white room
at about 6:07 a.m. where they will be assisted by white room per-
sonnel in getting into the crew cabin.
Just prior to the T-1 hour mark, the test team and the
flight crew will get another weather update, including observa-
tions from an astronaut flying in a Shuttle Training Aircraft in
the KSC area.
The last two built-in holds will be 10 minutes in duration
and will occur at the T-20 minute mark or at 8:12 a.m. and at the
T-9 minute mark or at 8:33 a.m. During the final hold, the flight
crew and ground team receive the NASA Launch Director's and the
Mission Management Team's final "go" for launch.
Milestones after the T-9 minute mark include start of the
ground launch sequencer; retraction of the orbiter access arm at
T-7 minutes, 30 seconds; start of the orbiter's auxiliary power
units at T-5 minutes; pressurization of the liquid oxygen tank at
T-2 minutes, 55 seconds; pressurization of the liquid hydrogen
tank at T-1 minute, 57 seconds; and the electronic "go" to
Endeavour's onboard computers to start their own terminal
countdown sequence at T-31 seconds. The orbiter's three main en-
gines will start at T-6.6 seconds.
COUNTDOWN MILESTONES
Launch - 3 Days (Sunday, January 10)
Perform the call-to-stations at T-43 hours. Begin check out
of the backup flight system and review flight software stored in
mass memory units and display systems. Astronauts arrive.
Load backup flight system software into the orbiter's fifth
general purpose computer.
Begin stowage of flight crew equipment. Inspect the
orbiter's mid and flight decks and remove crew module platforms.
Start external tank loading preparations.
Launch - 2 Days (Monday, January 11)
Enter first planned built-in hold at T-27 hours for a dura-
tion of 4 hours. Activate orbiter's navigation system.
Resume countdown. Start preparations for servicing fuel cell
storage tanks and begin final vehicle and facility closeouts for
launch.
Clear launch pad of all personnel and load liquid oxygen and
liquid hydrogen reactants into the orbiter's fuel cell storage
tanks.
Enter second planned built-in hold at T-19 hours for four
hours.
After the loading operation, the pad will be reopened for
normal work and orbiter and ground support equipment closeouts
will resume.
Demate orbiter mid-body umbilical unit used during fuel
cell loading. Resume countdown. Activate orbiter communications
systems and prepare Shuttle main engines for propellant tanking
and flight.
Launch - 1 Day (Tuesday, January 12)
Install mission specialist seats in crew cabin. The tail
service masts on the mobile launcher platform will be closed out
for launch.
Enter planned hold at T-11 hours (5 a.m.) for a duration of
13 hours and 32 minutes.
During this hold, the orbiter's inertial measurement units
will be activated and kept in the "warm up" mode and film will be
installed in the numerous cameras on the launch pad. In addition,
safety personnel will conduct a debris walkdown and the pad sound
suppression system water tank will be filled.
The rotating service structure will be moved to the park
position during this hold at 11 a.m. Perform orbiter ascent
switch list in crew cabin.
Resume countdown at 6:32 p.m. Install time critical flight
crew equipment and perform the pre-ingress switch list. Start
fuel cell flow-through purge.
Activate orbiter fuel cells. Configure communications at
Mission Control in Houston for launch. Clear the blast danger
area of all non-essential personnel and switch orbiter purge air
to gaseous nitrogen.
Enter one-hour planned built-in hold at T-6 hours (11:32
p.m.).
Launch Day (Wednesday, January 13)
Resume countdown. Launch team verifies there are no viola-
tions of launch commit criteria prior to cryogenic loading of the
external tank. Start loading the external tank with cryogenic
propellants.
Complete filling the external tank with its flight load of
liquid hydrogen and liquid oxygen propellants. Perform open loop
test with range safety and conduct gimbal profile checks of orbi-
tal maneuvering system engines.
Perform inertial measurement unit preflight calibration and
align Merritt Island Launch Area (MILA) tracking antennas.
Enter two hour hold at T-3 hours. Closeout crew and ice in-
spection team proceeds to launch pad.
Resume countdown at T-3 hours (5:32 a.m.) Complete closeout
preparations in the white room and cockpit switch configurations.
Crew departs astronaut quarters at Operations and Checkout Build-
ing for the pad.
Flight crew enters orbiter. Astronauts perform air-to-ground
voice checks with Mission Control in Houston. Close orbiter crew
hatch. Begin range safety final network open loop command check,
perform hatch seal and cabin leak checks, begin the inertial
measurement unit preflight alignment and range safety closed loop
test. The white room is closed out and the closeout crew moves to
fallback area. Primary ascent guidance data is transferred to the
backup flight system.
Enter planned 10-minute hold at T-20 minutes.
Resume countdown. Transition orbiter onboard computers to
launch configuration and start fuel cell thermal conditioning.
Close orbiter cabin vent valves. Backup flight system transitions
to launch configuration.
Enter planned 10 minute hold at T-9 minutes.
Resume countdown.
Start automatic ground launch sequencer (T-9 minutes).
Retract orbiter crew access arm (T-7:30).
Start mission recorders (T-5:30).
Start APU's. Arm SRB and ET range safety safe/arm devices (T-5).
Start liquid oxygen drainback (T-4:55).
Start orbiter aerosurface profile test (T-3:55).
Orbiter transfers to internal power (T-3:30).
Start MPS gimbal profile test (T-3:30).
Pressurize liquid oxygen (LO2) tank (T-2:55)
Retract gaseous oxygen vent arm (T-2:55).
Fuel cells to internal reactants (T-2:35).
Pressurize liquid hydrogen (LH2) tank (T-1:57).
Deactivate SRB joint heaters (T-1:00).
LPS go for start of orbiter automatic sequence (T-0:31 seconds).
Start SRB gimbal profile test (T-0:6.6).
SRB ignition and liftoff (T-0).
12/22/92: JANUARY 13 SET FOR THE FIRST SPACE SHUTTLE FLIGHT OF 1993
Ed Campion
Headquarters, Washington, D.C. December 22, 1992
George Diller
Kennedy Space Center, Fla.
EDITORS NOTE: N92-110
NASA managers today set Jan. 13 as the launch date for the first
Shuttle mission of 1993. Designated STS-54, the flight has two primary
objectives -- deployment of the Tracking and Data Relay Satellite (TDRS-F) and
astronomical observations of invisible x-ray sources within the Milky Way
Galaxy with the Diffuse X-ray Spectrometer. A space walk (EVA) to evaluate
training methods and gain additional EVA experience also will occur during the
mission.
The launch window opens at 8:52 a.m. EST and extends for 2 1/2 hours.
The mission duration is planned for 6 days. Landing is scheduled for Jan. 19
at the Kennedy Space Center, Fla.
Commanding the STS-54 mission will be John Casper, making his second
flight. Don McMonagle, also making his second flight, will be the Pilot. The
three mission specialists for STS-54 are Mario Runco, making his second flight;
Greg Harbaugh, making his second flight, and Susan Helms, making her first
flight.
Source:NASA Spacelink Modem:205-895-0028 Internet:192.149.89.61
=--=--=-END-=--=--=
=--=--=START=--=--= NASA Spacelink File Name:6_7_11_11.TXT
1/7/93: BIG BANG THEORY PASSES TOUGHEST TEST
Paula Cleggett-Haleim
Headquarters, Washington, D.C. January 7, 1993
Randee Exler
Goddard Space Flight Center, Greenbelt, Md.
RELEASE: 93-5
The Big Bang Theory passed its toughest test yet with the latest
results reported from NASA's Cosmic Background Explorer (COBE) team at the
American Astronomical Society meeting in Phoenix, Ariz., today.
Precise measurements made by COBE's FIRAS of the afterglow from the Big
Bang -- the primeval explosion that began the universe approximately 15 billion
years ago -- show that 99.97 percent of the early radiant energy of the
universe was released within the first year after the Big Bang itself.
"Radiant energy" is energy emitted in any form of light, from x-rays
and gamma rays to visible and infrared light or even radio waves. COBE's Far
Infrared Absolute Spectrophotometer (FIRAS) was designed to receive the
microwave and infrared energy from the Big Bang.
"The Big Bang theory comes out a winner," said COBE Project Scientist
and FIRAS Principal Investigator Dr. John C. Mather of NASA's Goddard Space
Flight Center, Greenbelt, Md. "This is the ultimate in tracing one's cosmic
roots," Mather said.
All theories that attempt to explain the origin of large scale
structure seen in the universe today now must conform to the constraints
imposed by these latest measurements.
This includes theories that postulate large amounts of energy released
by such things as black holes, exploding supermassive stars or the decay of
unstable elementary particles. In other words, there were not a lot of "little
bangs," as suggested by some theories.
The Big Bang Theory predicts that the spectrum of relic radiation
should be that of a perfect "black body" unless there were major energy
releases more than a year after the explosion. (A black body is a hypothetical
cosmic body that absorbs all radiation falling on it, but reflects none
what-so-ever. A black body emits at the same temperature at every wavelength.)
These latest FIRAS results reveal that later energy releases did not occur.
The COBE scientists now can say that the temperature of the afterglow
radiation is 2.726 degrees above absolute zero (273 degrees below zero on the
Celsius scale) with an uncertainty of only 0.01 degrees.
Today's announcement is the result of analyzing data from the FIRAS
during its 10 months of observations. Hundreds of millions of measurements
were combined to obtain these unprecedentedly pre "Making certain that all of
the measurements were combined correctly required exquisitely careful work and
lengthy analysis by a large team of COBE scientists," Mather reported.
"We are seeing the cold glow still remaining from the initially very
hot Big Bang. These results now limit the size of any 'after shocks' following
the Big Bang. The closer we examine the Big Bang the simpler the picture gets,"
said Mather.
"It took us 18 years of careful effort to reach this point, but now we
can say that the Big Bang Theory has been tested against observations to a fine
degree of precision," explained Mather.
"Experimental evidence of the Big Bang was first found by Edwin Hubble
in the 1920's. He found that distant galaxies in ever direction are going away
from us with speeds proportional to their distance. Therefore, gallaxies that
are farther away are going faster. This is exactly the pattern that would
occur if the entire universe originated in a single explosion, now called the
Big Bang.
Papers on these results and their implications soon will be submitted
to the Astrophysical Journal for publication.
COBE, launched Nov. 18, 1989, is managed by NASA's Goddard Space Flight
Center, for NASA's Office of Space Science and Applications, Astrophysics
Division, Washington, D.C.
Source:NASA Spacelink Modem:205-895-0028 Internet:192.149.89.61
=--=--=-END-=--=--=
=--=--=START=--=--= NASA Spacelink File Name:6_7_2_16_3.TXT
1/7/93: HUBBLE DISCOVERS A DOUBLE NUCLEUS IN CORE OF ACTIVE GALAXY
Paula Cleggett-Haleim
Headquarters, Washington, D.C. January 7, 1993
Jim Elliott
Goddard Space Flight Center, Greenbelt, Md.
Ray Villard
Space Telescope Science Institute, Baltimore
RELEASE: 93-006
Astronomers, using the Hubble Space Telescope, now
believe that a galaxy they have observed for a decade
actually is composed of two merged galaxies and that the
collision has provided new fuel for a massive black hole
which is spewing out a jet of gas and other matter 240,000
light-years long.
The galaxy is Markarian 315 located about 500 million
light-years from Earth. The collision and refueling theory
emerged after the Hubble Telescope revealed that the galaxy
has a double nucleus or two core-like regions.
The brighter core-like region is believed to harbor the
massive black hole which accounts for the tremendous amounts
of energy produced by the galaxy. The fainter nucleus is
considered to be the surviving core of a galaxy that recently
merged into Markarian 315.
"The galaxy's active core presumably harbors a black
hole which has been re-fueled by the galactic collision,"
said Dr. Jack MacKenty, Assistant Scientist at the Space
Telescope Science Institute in Baltimore.
"The Hubble images provide support for the theory that
the jet-like feature may be a 'tail' of gas stretched out by
tidal forces between the two galaxies as they interacted,"
explained Dr. MacKenty, Assistant Scientist at the Space
Telescope Science Institute.
"The jet feature is most likely a remnant of a merger
between Markarian 315 and a smaller galaxy," said MacKenty.
This observation best explains the extraordinary 240,000-
light-year long jet-like feature of Markarian 315.
An image of the core of Markarian 315, taken with the
Hubble Space Telescope's Wide Field and Planetary Camera
shows a second, fainter nucleus located approximately 6,000
light-years (or 2 arc seconds in angular separation) from the
galaxy's bright central nucleus. One light-year equals
approximately 5.8 trillion miles (9.3 trillion km).
Galaxy mergers may be one mechanism for driving gas deep
into the heart of a galaxy, astronomers believe. This raw
material fuels massive black holes, theorized to be the
"central engines" in Seyfert galaxies and other active
galaxies.
The Hubble Space Telescope's high spatial resolution
allows astronomers to probe the cores of Seyfert galaxies in
unprecedented detail. In exposures taken with ground-based
telescopes, the companion nucleus is drowned out by the
brighter Seyfert nucleus.
The report on this discovery is by Drs. John MacKenty
and Andrew Wilson of the Space Telescope Science Institute,
Baltimore; Richard Griffiths of The Johns Hopkins University,
Baltimore; and Susan Simkin of Michigan State University,
East Lansing. The report was delivered at the 181st Meeting
of the American Astronomical Society meeting in Phoenix,
Ariz.
The Hubble Space Telescope is a project of international
cooperation between NASA and the European Space Agency.
Source:NASA Spacelink Modem:205-895-0028 Internet:192.149.89.61
=--=--=-END-=--=--=
=--=--=START=--=--= NASA Spacelink File Name:9_4_2_5.TXT
NOTE: This file is too large {133154 bytes} for inclusion in this collection.
The first line of the file:
EDUCATIONAL HORIZONS WINTER 1992 Volume 1 Number 4
Source:NASA Spacelink Modem:205-895-0028 Internet:192.149.89.61
=--=--=-END-=--=--=
=--=END OF COLLECTION---COLLECTED 10 FILES---COMPLETED 21:11:43=--=